Micromanipulator

Motor or Manual

  • Micromanipulator M1 - manuell
  • Micromanipulator MMJ
  • Micromanipulator SM 3.25 - Motorized

Micromanipulator M1 - manuell

Micromanipulator M1
Micromanipulator M1 with tripod-flat

The manual micromanipulator M1 distinguishes itself especially by optimized ergonomics. The control knobs for all three axes are arranged at the same level so that the M1 can be easy operated and without looking after a very short time.

In addition, the operational controls are not attached laterally but at the back instead so that several devices can be easily installed side by side.

The precise and stable cross roller bearings are almost completely free of wear, even after many years of intensive use.

The M1 is surely the most often used micromanipulator worldwide.

Micromanipulator MMJ - manuell

MMJ
MMJ with Joystick

Besides having adjustment buttons for the X-, Y- and Z-axes, the micromanipulator MMJ also has a mechanical joystick for the X- and the Y-axes that enables movement within µm range.

The Z-axis is equipped with a coarse adjustment and a fine adjustment (10 : 1 ratio) that enables both quick tool changing assembly as well as exact positioning.

The precise and stable cross roller bearings are almost completely free of wear, even after many years of intensive use.

Micromanipulator SM 3.25 - Motorized

The Micromanipulator SM 3.25 is equipped with a stepper motor driving mechanism, which, in combination with the controller TANGO, enables even smallest step sizes up to 0.01 µm. Only these extremely small single steps enable stepper motors to carry out a motion sequence that is absolutely free of vibration.

The mechanical construction of the micromanipulator SM 3.25 is exceptionally compact, so that it can be attached directly to the plain stage of a microscope.